"If You Need Cleaning, You Need Al Goma"

A Better Way To Clean And Disinfect Water Storage Tanks

Water storage tanks are a great example of how equipment can be vulnerable to infection because of its location. When the tank is outdoors under direct sunlight, extreme heat and exposure to the elements will cause bacteria to multiply. In addition, the smell and taste of the water stored in your water storage tank can also indicate that something is wrong. Well, read this article to learn about it in detail.

Storage tanks are the most important part of any water system, and they should be cleaned regularly. The tanks can be flushed through once in a while, but it is not enough to keep them clean and disinfected. It is also essential to make sure that you are using the right chemicals to keep your tank safe from bacteria growth.

When and how to clean the tank?

Water storage tanks should be cleaned at least 3 times a year. This is because they are exposed to bacteria, which can cause infections if not cleaned properly. However, flushing the tank through is the best way to clean it. It removes all impurities from your water supply without adding any chemicals or detergents into the system.

Step-by-step Process to Clean Water Tank

With the understanding that water is a vital part of any plumbing system, it is imperative that you take care of your water tank properly. If water stagnates and gets discolored, your family could be at risk. Here’s a step-by-step process to clean your water tank:

Step 1 – Preparation and Cleaning of the tank

The first step to cleaning your water tank is turning off the water supply. This will ensure that you don’t get any accidental spillage from the tank itself, which can be quite dangerous. Before starting this process, you should also ensure no leaks in your house or building.

Once you’ve turned off the water supply, it’s time for some preparation! First things first: clean up around without any contaminants left behind after hand washing or scrubbing down surfaces with soap pads. You’ll want a well-ventilated area where air flows freely through cracks in walls and ceilings so fumes won’t build up inside.
Next up comes cleaning equipment. A brush works best here because it has bristles made of synthetic fibers like nylon or polyester. It won’t scratch plastic surfaces either way round but still, give good results when used correctly every time.”

Step 2 – Disinfecting the Tank

After you’ve cleaned the tank, it’s time to disinfect it. Disinfectants can be used in several ways to kill bacteria, viruses, and other pathogens. One of the most common methods is chlorine. Chlorine works by breaking down organic matter into simpler compounds that can’t support microbial growth.

Here are some ways you can achieve this:

  • Remove sediment by washing down your storage tank with running water for about 15 minutes or so (make sure not to fill up too much). This removes any dirt that may be present in an already clean tank. If there are still little bits of debris left behind after this process, try scrubbing them off with a brush or sponge before moving on with Step 3 below!
  • Remove algae by rinsing out any algae growth inside your storage tank using warm or hot water until no longer visible on the top surface (you don’t want this stuff floating around!). If possible, try not to use hot temperatures when doing so because they could damage certain materials. It may cause leaks later down the road if left untreated long enough before fixing anything else besides cleaning out excess buildup due to poor maintenance practices.
Step 3 – Disposing of Liquid Waste Safely

Disposing of liquid waste safely is essential. The disinfectant should comply with local regulations and be used only when necessary. When disposing of any solutions used for disinfecting and cleaning the tanks, caution must be taken as some chemicals may cause skin irritation or damage if not disposed of properly.

To avoid accidental contamination of foodstuffs, it is recommended that all containers containing potable water are marked “Disinfected” or have a similar label indicating their status as food-safe products.

Final Say

So, there you have it: a simple guide to cleaning and disinfecting water storage tanks. We hope that this information will help you and your family stay safe from illness caused by bacteria or viruses that may be lurking in your water tank.

By: admin
In: Blog
0
admin

Leave a Comment

All fields with * are required.

WhatsApp WhatsApp us